בקר מהירות מנוע DC שלט רחוק DC מברשת מברשת מברשת ווסת 6.5V עד 55V 30A RUCK MOTOR ROCLE ROCK ו- STOP TIMER

מפרט

Item Type:

DC Motor Speed Controller

Input Voltage:

DC6.5V-55V (the specific voltage must be equal to the rated voltage of the motor)

Output Voltage:

Linear under load

Instantaneous Current:

30A

Continuous Current:

≤20A

Speed Regulation Type:

Current Regulation

Speed Adjustment Method:

Jog + -

Wireless Remote Control:

Support

Remote Control Battery:

CR2032 button battery

Timing:

Yes

Slow Run Slow Stop:

Can be set

Speed Digital Display:

0-100 percentage

Speed Range:

0-100%

Control Frequency:

15KHZ

Connection Type:

Fence type terminal

Supported Motor:

Brush Motor

Module Size:

116x76x30mm / 4.57x2.99x1.18in

Mounting Size:

109x70mm / 4.29x2.76in

Installation Method:

Embedded

Function:

1-2-3-4-5-6-7-8-9 function settings are as follows:

Slow Run Time Setting Function 1:

000-100, slow start to 100% speed, adjustable time 0-10s, default is 1s.

Slow Run Time Setting Function 2:

000-100, slow stop, adjustable time 0-10s, default is 1s.

Speed Lower Limit Setting Function 3:

000-080, adjustable minimum speed 0-80% and less than the maximum speed setting value, default is 0.

Speed Upper Limit Setting Function 4:

000-100, adjustable maximum speed 0-100% and greater than the minimum speed setting value, default is 100%.

Acceleration/Deceleration Value Setting Function 5:

001 002 005 010 015 020 025, Each time the key increase/reduce is pressed, the speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%.

Motor Run Time Setting Function 6:

1s to 99h 59min 59s, default is 99h 59min 59s.

Motor Stop Time Setting Function 7:

1s to 99h 59min 59s, default is 99h 59min 59s.

Cycle Times Of Motor Run Stop Function 8:

Adjustable 1-999 times, default 999 times

With/Without Timing Selection Function 9:

0

Package List:

1 x Motor Speed Controller:

1 x Remote Control: